(The following story by John Dodge appeared on the Design News website on October 21.)
New technologies need champions and in the 1980s, Positive Train Control (PTC) found one in Burlington Northern Railroad (BN) R&D Director Steve Ditmeyer.
Ditmeyer and other BN executives pioneered the development of ARES (Advanced Railroad Electronics System), a PTC system that promised to thrust the railroad into the digital age. The idea first came to BN CEO Richard Bressler who recruited Ditmeyer to establish an R&D department.
“He had been flying around in the corporate plane in the early ‘80s, reading about new generations of avionics and how they improved flight safety and efficiency. Bressler was an engineer and he hired me from the Federal Railroad Administration (FRA) to investigate the new technology for BN,” recalls Ditmeyer, an industrial engineer and economist.
Indeed, ARES was modeled like an air traffic control system and was based on the avionics developed by Rockwell Collins for the then-new Boeing 757 and 767 jetliners. After a successful demo in 1985, a prototype system was launched over a 250-mile stretch of track in north Minnesota’s Iron Range in 1987.
“It worked as advertised for five years. It always worked consistently,” says Ditmeyer.
TRAINS magazine columnist and veteran transportation writer Don Phillips remembers when BN brought the media to the Iron Range for a demonstration. Specifically, he recalled a BN executive ordering a locomotive engineer to attempt going through a red signal. Knowing the rules, the engineer refused unless some higher up gave him the order in front of witnesses.
“The engineer was dubious as hell. I don’t think he trusted the technology,” says Phillips. “The train never reached the signal. He tried to start up again and the train started to creep and let him go 10 feet and shut him down again. It was impressive.”
By 1989, the ARES prototype was deemed a success. Trains could reliably be located in real time by GPS run against a Geographical Information System (GIS). Communications between locomotives, dispatcher and trackside devices were carried over BN’s extensive microwave and radio networks. And PTC trains would be stopped automatically if the engineer exceeded speed limits and violated track authority.
It was decided to study the possibility of a much larger $350-million rollout covering BN’s main route from Minneapolis to Seattle. At $80K per locomotive, the cost was steep even for a railroad with $4.6 billion in revenues. Locomotive equipment constituted 60 percent of the cost with the rest evenly split between trackside communications and dispatching centers.
The national passenger railroad Amtrak under railroading executive legend Graham Claytor also supported the project and agreed to deploy the system on Amtrak locomotives that ran over BN’s rails as well as from Porter, IN, to Kalamazoo, MI.
“Claytor, also a former Deputy Secretary of Defense, grasped its (significance) immediately. It wasn’t a sell to him,” says Ditmeyer. Indeed, all BN and Amtrak locomotives running between the Twin Cities and Seattle would be PTC equipped. In all, ARES would cover 2,700 miles of track with three advanced control centers, 90 base radios, 491 wayside interface units and equip 540 locomotives.
Hesitancy to invest in the expanded ARES could be found everywhere in numerous consulting reports that weighed costs and benefits. In a 1990 Harvard Business School study, BN CEO Gerald Grinstein expressed concern about BN going it alone when other railroads were working a competing system called Advanced Train Control System.
What’s more, BN was retiring debt which consumed resources and among its top executives was deep concern that the cost might have been underestimated. Uncertainty over the benefits also pervaded the discussion. ARES could safely put trains on the system, but how many dollars that would generate was unclear. Executives wanted guarantees and of course, there never is with bleeding-edge technology. ARES also expansively altered train operations, not just the signaling and dispatching, and that intimidated some railroaders in an industry whose resistance to change is the stuff of legends.
Alas, the ARES prototype in the Iron Range was shut off in 1993.
Ditmeyer believes the decision boiled down to the differing priorities of two CEOs. During his tenure, Bressler championed new technology while his successor Gerald Grinstein had different priorities. However, ARES got far enough along for Amtrak and BN to publish a glossy ARES brochure showing Claytor and Grinstein shaking hands and a development timeline.
Countless lost dollars, accidents and deaths later, America’s railroads save about 250 miles in the Northeast Corridor still do not have PTC.
“I’m appalled that [Chatsworth] occurred. My friends and I ask: “Is this the accident that finally makes Congress make the railroads install PTC?” says Ditmeyer, now semi-retired and an adjunct professor at Michigan State University’s Railway Management Program.